500 Pcs / min Medical Capsule Separating Machine Semi - Auto
Capsule And Powder Recycling
In the relatively airtight environment-working cabin, use high and
low pressures to alternate changes rapidly “pressure shear” causing
pulsed drawing force to the capsule. Under the continuous function
of the pulsed drawing force, the capsule is gradually drawn and
The working process is divided into two stages: boosting pressuse
shear and preseuer release shear. Boosting pressure shear is the
high and low pressure shearing process generated by shearing
pulsed-wave work, during which, the drawing force to the capsule
wil be increased from zero, gradually the cap of the capsule will
begin to fetch way outwards from the closed slot, For the capsule
and the cap is completely opened, the powder is scattered out.
For large, stable capsule production with a small quantity of
abnormal capsules and timely disposal of abnormal capsules in daily
production to save labor and costs (particularly expensive medicine
powder), also avoiding contamination caused by manual disposal.
1. Applicable for all model No., no need to change any molds, and
no need to adjust.
2. Powder just can touch air, so, no metal fragments, and no
pollution of lubricant.
3. Capsule shell intact after powder recovered. Wealthy capsule can
use again, thus can save cost further.
4. Operation without dust, epi-ready and convenient to handle,
dismantle, install and clean with rational structure, and easy to
|Decapsulator Model Technical Specifications|
|Model||CS - Mini||CS1||CS2 - A||CS3||CS3 - A||CS 5 - A|
|Efficiency||500 pcs/min||700 pcs/min||3000 pcs/min||1000 pcs/min||1000 pcs/min||5000 pcs/min|
|Application Range||000#, 00#, 0#, 0el, 1#, 2#, 3#, 4#, 5# and other hard capsules|
|Mode||Semi - auto||Semi - auto||Semi - auto||Auto||Auto||Auto|
|Working Voltage||220V AC 50-60HZ|
|Operation Style||Buttons||Buttons||Buttons||Buttons||Touch Screen||Touch Screen|